+86-533-6286577

Alumina Silicate Ceramic Fiber Module For Furnace Door Fire Blocking And Heat Insulation

Apr 18, 2022

When the ceramic fiber module is used as a kiln wall lining in a high-temperature kiln, the surface temperature of the furnace body will drop, providing a good environment for the safe production of workers; the internal temperature heat loss is reduced, the temperature difference of each zone is reduced, the temperature is stable, and the product quality is improved. . The reduction of heat loss reduces fuel energy consumption and reduces production costs, while heat balance increases production capacity simultaneously. The good heat sensitivity of the aluminum silicate fiber lining makes the heating speed faster, and the heating time of the billet and other products is shortened, thereby reducing the oxidation burning loss of the product. Aluminum silicate fiber is resistant to rapid cooling and rapid heating, and will not shrink or crack the furnace lining due to opening and closing of the furnace. Compared with refractory bricks and castables, its service life is longer.

 

The ceramic fiber module is made of ceramic fiber loose cotton woven into a blanket, and a cotton block made by packing under certain pressure. It is fixed with matching heat-resistant steel anchors, and is matched with a light-weight refractory and heat-insulating furnace lining for backing blankets.

Compared with heavy furnace linings such as castables, ceramic fiber modules are dry products that can be put into use after being fixed without the need for an oven. In addition, the weight is very light, which can effectively relieve the load-bearing pressure of the furnace body; the refractoriness is high, and the application is wide; the thermal conductivity is low, and the thermal insulation effect is remarkable; the cost is the same or even lower than that of heavy refractory materials.

www.suntherm-industry.com


Send Inquiry