Product description of zirconium-containing ceramic fiber module:
The zirconium-containing ceramic fiber modular lining structure is to fold a zirconium-containing ceramic fiber blanket with a temperature of 1430 degrees into an organ-shaped fiber module according to a certain width, and then compress the fiber folded block to a certain amount, and must be bundled in a compressed state. At the same time, pre-embedded anchors (some are not pre-embedded, and are directly installed and fixed during on-site construction) constitute a zirconium-containing ceramic fiber module, which is connected and fixed by various forms with metal anchors welded to the furnace shell steel plate. structure.
Advantages of choosing SUNTHERM zirconium-containing ceramic fiber modules:
1. Continuous production, short cycle, large output and high quality.
2. It works by the countercurrent principle, so the heat utilization rate is high, and the fuel is economical. Because the heat retention and waste heat utilization are good, the fuel is very saving, which can save about 50-60% of fuel compared with the inverted flame kiln.
3. The firing time is shortened. Compared with ordinary large kilns, it takes 3-5 days from loading to emptying, while tunnel kilns can be completed in about 20 hours.
4. Save labor. It is not only easy to operate when burning, but also the kiln loading and kiln discharge operations are carried out outside the kiln, which is also very convenient, which improves the working conditions of the operators and reduces the labor intensity.
5. Improve quality. The temperature of the three parts of the preheating zone, the firing zone and the cooling zone are often kept within a certain range, which makes it easy to grasp the firing law, so the quality is also better and the damage rate is less.
www.suntherm-industry.com
