Ceramic fiber modules have excellent characteristics such as temperature resistance, heat insulation, light weight, and thermal shock resistance. Used to replace traditional heavy refractory materials as industrial furnace wall lining materials, it can effectively strengthen the thermal insulation structure of industrial furnaces, effectively control the heat loss of the furnace body, and achieve the effect of saving energy. Due to the use of ceramic fiber wall lining, the furnace wall is light and the heat capacity is low, which can effectively increase the heating rate of the furnace, shorten the operation cycle of the furnace, improve the integrity of the kiln's refractory and heat insulation, and promote the progress of kiln masonry technology.
The ceramic fiber modules will squeeze each other tightly in different directions without gaps after unbundling;
Elastic fiber modules can resist external mechanical force;
The elasticity of the fiber module can compensate for the deformation of the furnace shell, so that there is no gap between the modules;
Due to its light weight, it absorbs little heat when used as a thermal insulation material;
Low thermal conductivity brings high energy saving effect;
Has the ability to resist any thermal shock;
The lining does not need to be dried and maintained, so it can be put into use immediately after installation;
The anchoring system is away from the hot surface of the module, so that the metal anchors are at a relatively low temperature.
Typical application
Petrochemical: heating furnace, reforming furnace, pyrolysis pipeline;
Steel: ladle cover, pit type soaking furnace cover, heating furnace, single coil or multi coil sheet annealing furnace, continuous annealing and coating furnace, ring furnace, car bottom furnace, roller hearth furnace, bell furnace, hot air pipe and flue, etc.;
Aluminum processing: well-type soaking furnace and furnace cover, crucible furnace, homogenizing furnace, flue;
Ceramics: Tunnel kiln and batch kiln for firing tableware, Hoffmann kiln for firing sanitary ware and bricks. Thermal insulation of firing kilns, flues and flames for technical ceramics;
Boiler: high temperature oxidation device, exhaust gas recovery device, combustion chamber, boiler flue.






