The thermal insulation experiment of ordinary blankets is mainly to observe the fire resistance and thermal insulation performance of ordinary ceramic fiber blankets of different thicknesses, and the performance of temperature resistance and thermal insulation under flame combustion. The following are the details of the experiment
Experiment introduction
We selected two ceramic fiber ordinary blankets with the same thickness of 128kg/m3 but different thicknesses of 30mm and 50mm, using a portable flame spray gun and a thermometer to observe the changes and thermal insulation effect of the two ordinary blankets of different thicknesses in the face of flame burning.
01
30mm thick - temperature resistance test
Place a 30mm thick blanket with a density of 128kg/m3 at room temperature and burn it directly on the blanket surface with a flame. Use two thermometers to test the burned surface and the backfire surface at the same time. After burning for a certain period of time, you can see the thermometer. The instrument shows that the temperature is above 700℃, and the temperature of the back fire surface has reached about 37℃. It can be seen that there is no yellowing and agglomeration on the surface of the 30mm ordinary blanket after being burned by the flame, and it is not hot to touch the back of the fire with hands.
02
50mm thick - temperature resistance test
Place a 50mm thick blanket with a density of 128kg/m3 at room temperature and burn it directly on the blanket surface with a flame. Similarly, use a thermometer to measure the temperature. After burning for a certain period of time, we can see that the thermometer shows that the temperature reaches 800℃. Above, the temperature of the backfire surface is about 33°C. It was also observed that there was no obvious change on the surface of the 50mm ordinary blanket, and the surface was not hot when touched by hand.
Data comparison
The surface temperature of the 30mm ordinary blanket with a density of 128kg/m3 reaches 700℃ when the flame burns, and the temperature of the other side is about 37℃. The surface temperature of the 50mm ordinary blanket with the same density of 128kg/m3 reaches over 800℃ when the flame burns, and the temperature on the other side is about 33℃.
Conclusion
The 30mm and 50mm thick blankets with the same density of 128kg/m3 did not show obvious changes after a period of time on the flame burning surface, and the back fire surface can be directly touched by hand without being hot. And it can be concluded that the thickness has a slight influence on the temperature resistance and heat insulation performance of the ceramic fiber blanket.
Ceramic fiber ordinary blanket is a continuous noil laying fiber blanket, which has higher tensile strength and flat surface after double-sided needle punching process. Does not contain organic binders and has good chemical resistance.
SUNTHERM's ceramic fiber ordinary blankets have corresponding test reports and meet the national standard. We focus on the production of high-quality ceramic fibers!






