Ceramic fiber board is suitable for high-temperature fields that require rigidity and strength of products, but sometimes some yellowing occurs, which actually affects our use to a certain extent, not only affecting the beauty, but also affecting its use effect to a certain extent. So, what is the reason for the yellow color in ceramic fiber board? The main reasons are as follows.
1. The yellowing of ceramic fiber board is mainly caused by crosslinking agent and tackifier in neutral glue. The reason is that these two raw materials have "amine groups", which easily lead to yellowing, so many imported glass glues also have yellowing phenomenon.
2. If external neutral transparent adhesive is used together with acidic glass adhesive, it may cause the neutral adhesive to turn yellow after curing.
3. This may be caused by the long storage time of glue or the reaction between glue and substrate.
The raw material of ceramic fiber board is blown fiber (short, fine, easy to break and easy to mix), which is added with a certain proportion of binder and filler-grade additives, and then fully dispersed into slurry in a slurry mixing tank after beating. Pumped into the forming pool, stirred with compressed air. The mold is put into the forming pool, and the fiber slurry is adsorbed on the mold by the principle of vacuumizing.
Ceramic fiber board can accurately control the adsorption time, dehydrate the wet fiber material in vacuum, demould it, put it on a tray, and send it to a drying furnace for drying for 10~24 hours. After the fiberboard is dried, it passes through a special grinder and edge trimmer, and its size is accurately controlled.
In addition to the excellent properties corresponding to loose ceramic fiber cotton, ceramic fiber board also has hard texture, excellent toughness and strength, and excellent wind erosion resistance. It is an ideal energy-saving material for thermal insulation, kilns, pipelines and other equipment, and it is non-expansive when heated, light in weight, convenient for construction, and can be cut and bent at will.
Ceramic fiber board has high compressive strength and long service life; Low heat capacity and low thermal conductivity; Good toughness and non-brittle materials; Accurate size and good flatness; Easy cutting and installation, convenient construction; Excellent wind erosion resistance; Continuous production, uniform fiber distribution and stable performance.
www.suntherm-industry.com






