The Ceramic fiber insulation modules and the folding block are made of the corresponding material of the ceramic fiber filament needle punched blanket,
The structure and size of the three-dimensional components are processed on special machinery. In the process of processing, a certain proportion of
The amount of compression to ensure that the ceramic fiber module expands in different directions after the wall lining of the ceramic fiber module is completed.
Make ceramic fiber modules squeeze each other into a seamless whole, ceramic fiber modules can pass various forms of
The anchor is directly fixed on the anchor nail of the steel plate of the industrial kiln shell.
The various forms of anchors on the back of the module make the Ceramic fiber module installation either side-by-side arrangement or parquet floor arrangement. The folded blankets will squeeze each other in different directions after unbundling, without gaps;
The elastic fiber blanket can resist mechanical external forces, and the elasticity of the fiber blanket can compensate for the deformation of the furnace shell, so that there will be no gaps between the components;
Due to its light weight, it has little heat absorption when used as a thermal insulation material, and low thermal conductivity brings high energy-saving effects;
Have the ability to resist any thermal shock;
The lining does not need to be dried and maintained, so it can be put into use immediately after installation;
The anchor system is far away from the hot surface of the component, so that the metal anchor is at a relatively low temperature, which improves
Improve the safety of anchors;
www.suntherm-industry.com
