Ceramic fiber module is mainly used in various industrial furnaces, heating equipment lining. Although the production of modules may seem simple, if not taken care of, or if the details are not done well, then it is easy to cause quality problems that can affect the installation, or cause major problems in later use. So how to ensure the quality of ceramic fiber module?
01 First of all, starting from the raw materials of the module, Suntherm is used to produce ceramic fiber blanket, from the source to ensure quality while reducing costs, to benefit customers.
02 Second, in addition to meeting customer requirements, Suntherm will also be on ceramic fiber products real-time testing quality, quality always ensure national standards!
Ceramic fiber modules have excellent wind corrosion resistance. The greater wind corrosion resistance of traditional laminated fiber lining is 10m/s at 900℃, while the greater wind corrosion resistance of fiber module lining is greater than 30m/s. If the prefabricated fiber module contains inorganic binder, its wind corrosion resistance can reach 50m/s. The application of ceramic fiber modules--Furnace lining insulation in petrochemical industry; Kiln lining insulation in metallurgical industry; Ceramic, glass and other building materials industry furnace lining insulation; Heat treatment industry heat treatment furnace lining insulation; Other industrial kiln lining insulation. With the promotion of energy saving and emission reduction plan, the transformation of brick-mixed tunnel kiln is imminent. Ceramic fiber has been highly praised on the ceiling insulation of brick-fired tunnel kiln for its excellent thermal insulation performance.
Application effect of ceramic fiber module
The precompression of ceramic fiber modules can compensate for shrinkage at high temperature, which not only reduces the thermal shrinkage of fiber lining, but also increases the operating temperature by more than 50℃ under the same conditions compared with traditional laminate fiber lining.
Simple structure, convenient installation, save the working time. When repairing the fiber lining, there is no need to remove a large area, and only the fiber module in the damaged part can be quickly restored to production.
