There are two types of refractory ceramic fibers: ceramic fiber modules and folded blocks. In addition to the difference in density, the modules have anchors and wooden boards, while the folded blocks do not. The ceramic fiber module is mainly made of ceramic fiber acupuncture blanket of corresponding material, which is processed on a special machine according to the structure and size of the fiber component. During the processing, it is finally formed by pressing according to the desired specifications.
Ceramic fiber modules are divided into 9 grades according to the operating temperature, from 900 ° C to 1600 ° C, ordinary, standard, high-purity, high-aluminum, zirconium-aluminum, chromium-containing, zirconium-containing, etc., which can meet the needs of various furnaces and thermal equipment. Different grades of different parts have different forms of thermal insulation requirements. With the advancement of the national energy-saving and emission reduction plan, the renovation of the brick-burning tunnel kiln is imminent, and the ceramic fiber module has been greatly praised for its excellent thermal insulation performance in the ceiling of the brick-burning tunnel kiln. With the key reforms in environmental protection, ceramic fibers have played a certain role in environmental protection.
The main components of ceramic fibers are Al2O3 and SIO2. Among them, the Al2O3 content in the high-alumina ceramic fiber module is relatively high (respectively, the chemical composition of ordinary type, standard type, high-purity type, high-aluminum type, and zirconium-containing type), which is 52%~55%, which belongs to injection fiber. It is also different from the spinning fiber. The diameter of the blown fiber is smaller, generally 2.0~3.0 μm, and the length of the fiber is shorter, generally 100~200 mm. Because the fiber is thinner, the thermal conductivity is better than that of the spinning fiber. It is easily broken and torn during the folding process. On the other hand, the high-alumina type has a relatively high content of Al2O3, so it should be avoided in the kiln with electric heat as the heat source, so as to avoid the loss of personnel and property caused by electrical conduction, and the consequences are immeasurable. In general, the standard type is more commonly used, but the type of ceramic fiber module should also be selected according to the temperature of the kiln.
www.suntherm-industry.com






