Rockwool Comfort Board 80

Product Description

SUNTHERM Rockwool comfort board 80, Rock wool series products include: mineral rock wool board, mineral rock wool pipe, mineral rock wool strip, etc. our factory can customize various specifications according to customer requirements.

 Product Parameter of the Rock wool board

Precautions for construction of external insulation system of rock wool exterior wall

1. Pay attention to rainproof and do not construct in rainy days.

2. For cold insulation, a moisture-proof layer must be added. Under the condition of special low temperature, rock wool without resin shall be used for thermal insulation, and the moisture-proof layer must also be fireproof

3. When the temperature exceeds a certain temperature, such as 200 ℃, appropriate external protection must be added to the insulation, so that the thickness and bulk density of rock wool board will not change.

4. For thermal insulation of finished rock wool products for large-diameter and flat wall equipment, when the temperature exceeds 200 ℃, be sure to remember the instructions of the rock wool board manufacturer: add thermal insulation nails (with a spacing of about 400mm) and stick the external protection tightly.

5. Equipment, insulation nails and pipes requiring insulation can receive appropriate coatings in order to facilitate corrosion prevention. In addition, there should be no leakage. This can achieve better results.

6. If the finished rock wool board is vulnerable to mechanical wear under the condition of outdoor thermal insulation, it should be covered with metal or plastic, and then pay attention to the joint and the sealing of the joint. If necessary, add glue seal, and the stacking part of the wrapping layer shall not be less than 100mm

7. When the thermal insulation object is placed at 90 degrees and has a certain height, the thermal insulation layer of rock wool board must have positioning pins or support rings, and the spacing must not be greater than 3m, so as to prevent the thermal insulation data from sliding downward in case of vibration.

8. In order to minimize heat loss, the joints of rock wool board and felt must be tightly connected. If there are multiple layers of insulation, each cross joint needs to be intertwined to avoid forming a thermal bridge. The cold bridge must be completely eliminated during cold insulation.

Actual photos of warehouse delivery

Hot Tags: rockwool comfort board 80, China, suppliers, factory, customized, wholesale, price, free sample, Rock Wool Blanket, Rock Wool Blanket for Low Density, Rockwool Insulation Blanket with Wire Mesh, Rock Wool Blanket with Wire Mesh, Rock Wool Board, Rock Wool Insulation Board