In the production and processing of ceramic fiber board, polishing treatment will be carried out, because after polishing treatment, not only the appearance of the board will be more beautiful, but also its service performance will be improved, such as durability, toughness and so on will become better. Therefore, it can be said that the polishing treatment will also affect the product quality and performance of the plate to a certain extent, so it must be carried out very carefully and correctly. And the following we will talk about the plate polishing treatment.
1. Grinding and polishing the ceramic fiber board with Al2O3 micropowder or diamond grinding paste.
2. Grinding and polishing by laser machining and ultrasonic machining.
3. Glazing method is needed (suitable for products with high requirements on surface smoothness).
4. Grind with diamond and silicon carbide which are harder than ceramic fiber board from coarse to fine step by step.
5. Processing the material surface of the product by ion implantation is a supplement to the existing toughening mechanism and a deep processing of the prepared product.
Therefore, when polishing the ceramic fiber board, we must strictly follow the correct treatment method, otherwise the wrong polishing method will not improve the performance of the board, but will reduce the product performance of the board, and then destroy the product performance of the board and make it unusable.
www.suntherm-industry.com
