In addition to basalt fibers, inorganic fibers used for high-temperature filtration of flue gas filter materials also include a variety of high-performance fibers, such as carbon fibers, glass fibers, and asbestos fibers. They have some or all of the properties of inorganic fibers, such as high temperature resistance, flame retardancy, high strength, high modulus, stable chemical properties, sound absorption and sound insulation, electric wave transmission, shock resistance and dielectric insulation. Although these fibers have many excellent properties, they also have certain defects. For example, the surface of carbon fiber is chemically inert, has low surface energy, and has a smooth surface, which is easy to cause static electricity during use; The fiber hardness is too high, the crimp is small, and the wear resistance is poor; the asbestos fiber will produce carcinogens during the use process, and the environmental protection is very poor.
As an ideal high temperature flue gas filter material, the main advantages of ceramic fiber are: filtration: high dust removal efficiency, up to 99%; high strength and heat resistance; good high temperature gas resistance corrosion and chemical corrosion. In terms of production technology: it has the characteristics of easy processing and convenient construction, and the source of raw materials is relatively wide. Environmental protection: no secondary pollution will be generated during use, no toxic and harmful gases will be generated, and no impact on the environment. Economic aspects: it has good regeneration performance, long service life, cheap and easy-to-obtain raw materials, and short processing flow of finished products. As a high-temperature filter material, ceramic fiber is easy to clean during use, so it has good economic characteristics.
Although ceramic fiber has many excellent characteristics, its main disadvantage is that it is not wear-resistant and collision-resistant, cannot resist the erosion of high-speed airflow, and cannot resist the erosion of slag. Therefore, in the process of use, the toughness of ceramics is often improved by diameter compounding, prestressing method and phase transformation method. In actual production, it is generally achieved by reducing the brittleness of ceramic fibers.






