The ceramic fiber module screw is part of the anchor.
The one-piece ceramic fiber module means that a part of the screw and other pieces are pre-embedded in the module during the manufacturing process and then packaged. This kind of module is suitable for the fixing of steel frame structure, and the ceiling of brick kiln is mostly used in this way.
Separate ceramic fiber module refers to the separate packaging of the screw and the module. When installing the ceramic fiber module, first weld the screw to the steel plate of the furnace wall, pass the ceramic fiber blanket through the screw and spread it evenly, then align the center hole of the ceramic fiber module with the screw and pass it through, then use a special wrench to tighten the internal nut of the module. .
No matter which type of module is used, the size and length of the screw play a vital role in the insulation effect and life of the ceramic fiber module lining. If the screw is too long and the end of the screw is too close to the fire surface, the screw is easily damaged and deformed under high temperature for a long time, which will cause the ceramic fiber module to fall off and shorten the service life of the furnace lining; The center of gravity of the module shifts to the fire surface, and the module is not firmly fixed, which will also affect the life of the ceramic fiber lining.
Take the SUNTHERM ceramic fiber modules as an example. The screw is generally 10mm in diameter, with a length of about 230mm, and the built-in size of the module is 80mm. The specific size varies slightly depending on the thickness of the tile.
www.suntherm-industry.com
