The industry knows that aluminum silicate fiber modules are a kind of thermal insulation material. Used to save energy, suitable for some high-energy-consuming equipment, such as boilers. The heat loss of the boiler is serious, so the aluminum silicate fiber module should be installed on the furnace wall of the boiler to achieve the effect of reducing heat loss and heat preservation. So how should the aluminum silicate fiber module be installed on the furnace wall of the boiler?
1. Before installing the aluminum silicate fiber module, weld the short anchoring nails on the furnace wall. Since the head of the short anchoring nails has threads, a layer of insulating rock wool needs to be laid on it. The thickness of this insulating rock wool Control between 15 ~ 20mm. In order to ensure that the center hole of the pressure strip on the back of the module is aligned with the short anchor nail, it is necessary to insert the short anchor nail into the hollow sleeve in the module, and also put the nut into the head sleeve of the wrench. Place the wrench in the hollow sleeve and fasten the nut to the head of the short anchor.
2. After the nut, the screw rod of the short anchoring nail, and the back pressure strip of the module are fixed through the above steps, the entire module can be fixed on the furnace shell.
3. The reinforcement plate is on the back of the module. This reinforcement plate is mainly used for connection with bolts. When installing the modules, the folding directions of the modules need to be staggered, so as to achieve a spaced installation, so that the modules can be freely expanded to fill the space after installation.
www.suntherm-industry.com
