+86-533-6286577

How To Clean Ceramic Gas Logs

Sep 08, 2022

One of the benefits of owning a gas fireplace is that it is easier to clean and maintain than a traditional fireplace. While some soot can build up on ceramic logs in a gas fireplace over time, excessive soot buildup is not normal and usually indicates a problem with combustion in the fireplace. If there is only a slight soot buildup, you can safely clean ceramic logs yourself. If you have a large amount of soot on your ceramic gas log, contact a professional fireplace specialist to have your gas fireplace inspected.

Step 1

Turn off your fireplace. Wait until it's cold to the touch before cleaning your ceramic gas logs.

Step 2

Find your gas fireplace's owner's manual so you can find cleaning instructions specific to your gas fireplace model.

Step 3

Line the floor in front of the fireplace with newspaper or plastic sheeting to protect the floor from any stray soot or debris.

Step 4

Use the hose and brush vacuum attachment to vacuum the inside of the fireplace and as much of the log surface area as possible.

Step 5

Refer to your owner's manual to see if you can remove the logs from the grate. Moving ceramic logs in some gas fireplaces can interfere with burning, so don't move them until you refer to the manual. If you can remove them without stopping the burn, do so and vacuum thoroughly.

Step 6

Gently scrub the ceramic gas log with a brush, and immediately vacuum the debris you brushed off the log.

Step 7

Use a dry, soft rag to remove any remaining soot from the logs. Do not use any type of cleaner on logs unless instructed to do so by your owner's manual, as the cleaner may react with gases or flames and cause more soot to form.

Step 8

Check your owner's manual to see if you can use a damp rag to remove any remaining soot. If the manual doesn't tell you if you can use water, dampen a rag and wipe in an inconspicuous area. You can also use a damp rag to clean other logs if the finish doesn't seem to be affected after the log has dried.

Step 9

If you've taken them out for cleaning, put them back in exactly the same position as before you removed them.


Send Inquiry