The combing device of the rock wool production line cotton collector is an important part of the cotton collector. Its working principle mainly involves the interaction of a series of combing elements. The specific steps are as follows:
1. Preliminary combing: After the raw material enters the cotton collector, it is first acted upon by a group of combing elements (such as needle cloth or wire brush). These elements are arranged at a certain angle and direction. Through interaction with the raw material, the raw material is preliminarily combed and thinned.
2. Combing and combing: The raw material after preliminary combing then enters the combing and combing stage. This stage is usually composed of multiple fine combing elements. Through more detailed combing, impurities and short fibers in the raw material are further removed, making the raw material more neat and uniform.
3. Airflow finishing: The raw material after combing and combing will enter the airflow finishing area. By adjusting the strength and direction of the airflow, the raw material forms a uniform cotton layer in the space, and at the same time, impurities and short fibers are further removed.
4. Transportation and output: The combed and sorted raw materials are transported to the output part of the cotton collector. After being processed by the cotton collector, rock wool fibers with better quality and more suitable for subsequent processing can be obtained.
