With the appearance of ceramic fiber board, more and more people choose to decorate with this board, not only because this board has very good product characteristics, but also because it is very convenient in construction and installation. However, if we want to play its role properly, we must use it correctly.
1, after the end of the aluminum silicate masonry, stop a appearance finishing, use pressure plate to draw the uneven area and where the gap is bigger, it must be filled with cut ceramic fiber board strip, to make the appearance smooth and close.
2. The thickness of fiber board brick lining should meet the requirements.
3. Thickness measurement After measuring the length and width, mark nine measuring points according to the position shown in the figure. Place the disc of the needle thickness gauge flat on the sample quietly, align the disc hole with the measuring point, and insert the needle tip of the cursor downward into the disc hole carefully. When the needle tip touches the sample, gently press the cursor to read the thickness after the sample touches the glass plate.
4. The Al2O3 content of ceramic fiber tiles is not less than 45%.
5. Stop the trial arrangement before paving the fiber board bricks, and the separation layer should be sticky and firm, with staggered gaps.
The above is how to use the ceramic fiber board. When you decorate with this fiberboard, you must strictly regulate your own construction and installation methods. And communicate with the manufacturer to guide material selection, construction and maintenance. So as to achieve the purpose of good materials and good use.
www.suntherm-industry.com
